Will Renault Clio Alloys Fit a Nissan Note? Here’s What You Need to Know

Mario's Wheel Repairs
13 February 2025
Will Renault Clio Alloys Fit a Nissan Note?

If you've come across a set of Renault Clio alloys and are wondering whether they’ll fit your Nissan Note, you're not alone. Nissan and Renault share many components, but that doesn't automatically mean their wheels are interchangeable. Before making the switch, there are a few key factors to consider to ensure a proper fit and avoid any safety issues.

Key Factors to Check

Bolt Pattern (PCD - Pitch Circle Diameter)

The bolt pattern refers to the number of wheel bolts and their spacing. This must match between both vehicles for the wheels to fit securely.

  • The Nissan Note (2006-2017) typically has a 4x100 bolt pattern.
  • Renault Clio models also commonly use 4x100, but some versions, particularly newer ones, have 4x108 or 5x108, which will not fit a Note without adaptors.

Centre Bore Size and Spigot Rings

The centre bore is the hole in the middle of the wheel that fits onto the hub. A correct fit is essential for proper wheel alignment and to prevent vibrations.

  • Nissan Note wheels have a 60.1mm centre bore.
  • Renault Clio wheels may have a larger centre bore, in which case spigot rings are needed.

What Are Spigot Rings? Spigot rings are small plastic or metal rings that fill the gap between the larger centre bore of the wheel and the smaller hub of the car. They ensure a snug fit, improve wheel stability, and prevent vibrations at higher speeds.

If the Clio wheels have a smaller centre bore, they will not fit unless professionally machined.

Offset (ET - Einpresstiefe)

Offset determines how far the wheels sit inside or outside the wheel arches.

  • The Nissan Note's offset varies by model year and trim level, but it typically falls between ET35 and ET50.
  • If the offset is too high, the wheels may sit too far inward, potentially interfering with suspension components.
  • If it is too low, the wheels may stick out beyond the arches and cause rubbing.

To confirm the correct offset for your specific Nissan Note model, consult the owner’s manual or a wheel specialist.

Tyre Size and Load Rating

If the Clio alloys come with tyres, check whether they are suitable for your Nissan Note.

  • A different tyre size may affect speedometer accuracy, as a change in rolling diameter can cause incorrect speed readings.
  • Tyres that are too wide or narrow may impact handling, ride comfort, and clearance.

Load Rating: It’s also worth checking the load rating on the tyres to ensure they are suitable for the weight of the vehicle. Using tyres with an insufficient load rating can lead to tyre failure and compromise safety, especially when carrying passengers or heavy loads.

Use an online tyre size calculator, such as Wheel-Size.com, to check whether a tyre swap will affect rolling diameter and performance.

Wheel Stud and Nut Compatibility

Although the bolt pattern is crucial, the type of wheel nuts or studs must also be considered.

  • Ensure the wheel studs or nuts match the specifications for both the wheels and the vehicle's hubs.
  • Check for correct thread pitch, seat type (tapered, flat, or ball seat), and stud length to ensure a secure fit.

Mismatched studs or nuts can prevent proper wheel seating and create a safety hazard, increasing the risk of wheel loosening or failure while driving.

Will They Fit? The Verdict

If the bolt pattern (PCD) is 4x100, the centre bore is 60.1mm (or larger with spigot rings), and the offset is within range, then the wheels should fit without major issues.

If any of these factors don’t match, the wheels may require adaptors, spigot rings, or may not be suitable at all.

What to Do Before Installing

If everything checks out, follow these steps before fitting the wheels:

  • Test fit one wheel before mounting all four.
  • Ensure the wheels do not rub against suspension components or the wheel arches.
  • Check that the wheel nuts or studs are the correct type and tighten securely.
  • Retorque the bolts after 30-40 miles to ensure they remain properly tightened. This is crucial to prevent uneven stress on the wheel assembly, which can lead to wheel wobble, vibrations, or even stud failure.

Final Thoughts

While Renault and Nissan share a lot of engineering, it's essential to check bolt pattern, centre bore, offset, tyre size, load rating, and wheel nut compatibility before swapping wheels. If everything lines up, you could give your Nissan Note a fresh new look with those Clio alloys.

Disclaimer: This information is for guidance only. Always consult a qualified mechanic or to ensure proper fitment and address any potential safety concerns.